Technical Support Notes
| Article ID: | T3104 |
| Date: | 11/5/07 |
| Product: | EPSON RC+ v5.1.0 Vision Guide |
| Subject: | A ".vis file not found" error can occur after making a new project |
Symptoms
A ".vis file
not found" error if you disable vision, make a new project, enable
vision, and then open Vision Guide.
Causes
This is
caused by a bug in EPSON RC+ v5.x.
Remedy
Before creating a new project, select Setup | Vision,
then check the Enable Vision checkbox.
Status
This problem is fixed in v5.2.0.
