Technical Support Notes
| Article ID: | T3055 |
| Date: | 10/8/07 |
| Product: | Smart Camera v1.0.0.0, v1.0.0.1 |
| Subject: | Input string is not in the correct format can occur for Edge object |
Symptoms
If an Edge object is used in a sequence with a
standalone calibration, sometimes "input string is not in the correct
format" errors can occur in the EPSON RC+ GUI..
This is a memory initialization issue in the camera firmware so this problem does not always occur.
Causes
This is
caused by a bug in the Smart Camera firmware.
Remedy
Upgrade the Smart Camera firmware.
Status
This problem is fixed in Smart Camera firmware v1.0.0.2.
